ARRI ARRIFLEX 416 - Manual (Page 151)


11
Note: The frame information (the last two digits of the
timecode display) is only active if timecode is
actually recorded on film. If there is no time-
code recording on film, because for example
the camera is not running at a timecode speed,
only the symbol ** is displayed in that position.
• Enter the Timecode Menu from the Main Menu.
Changes made to settings are immediately activated.
Check all settings on a correctly adjusted monitor.
TC Time
This sub menu line switches the insertion of timecode data
on (ON) and off (OFF) independently of other inserted
data.
• Move the cursor > with the Ê and Ë keys to the line
– TIMECODE TIME. The Í or Ì keys switch the
insertion on and off.
MENU TIME CODE TIME
-> - TIME CODE TIME ON
- POSITION
- SIZE SMALL
- BACKGROUND BOXED
- FRAME COUNTER VIDEO
- EXIT
Video-A
ss
is
t-Sy
stem