ARRI ARRIFLEX 416 - Manual (Page 79)


 
Composite Video Outputs
Composite video is only available when the
output is switched to VBS out.
• To switch to composite video (VBS mode), enter the
main menu by pressing the Enter/Insert key Ñ for
more than 3 seconds. Go to sub menu VIDEO/TEXT
ADJUST. The menu line BNC OUT can be switched
between VBS and Y/C. See chapter 10.4 Inserter Facilities
for information on the on-screen program mode.
The difference between the outputs is that there is normal,
clean video on the one connector and video with burnt-in
data on the other.
In the clean video output, marked with the È/C symbol
a photo , almost no electronic information is inserted.
Only a rolling bar at the button left corner of the video
image indicates a running film camera.
In the video with data output, marked with the É/Y
symbol a photo , additional data, such as format marks
or camera status information, can be inserted.
Video-A
ss
is
t-Sy
stem
MENU VIDEO/TEXT ADJUST
- FLICKERFREE ON
- LINE INTERP. ON
- SHARPNESS 2
-> - BNC OUT VBS
Y/C DATA
- GENLOCK OFF
- MINI MON DATA OFF
- TXT WHITE LEV. 2
- TXT INVERS OFF
- TXT FINE POS. 2
- EXIT
The outputs are standard BNC sockets for 75 Ω
terminated video signals. Both outputs can be used
simultaneously.