ARRI ARRIFLEX 416 - Manual (Page 189)


1
The status LEDs indicate the following:
Color Status
Off no motor connected
Red motor connected but no control unit found
Green motor OK
Green blinking motor OK but at an end stop
Red blinking motor conflict: CLM-1 assigned to same function
Red/green alternating calibrating
The following pages show some possible setups of the
LCS and WRS systems. These are only examples and
further variations are possible. See the Lens Control
System Instruction Manual for more details.
Cable Appearance
LC-M1 Coiled, 1 m long outstretched
LC-M2 Straight, 0.5 m long
LC-Z1 Straight, 3.5 m long
LC-Z2 Straight, 7 m long
Cables LC-M1, LC-M2, LC-Z1 and LC-Z2 are inter-
changeable and differ only in appearance and length.
ARRIFLEX

1

Plu
s