CatEye CC-GL50 [Stealth 50] - Manual (Page 35)

35
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Changing the
computer
configuration
Others
Selecting the speed unit
Select the speed unit (km/h or m/h).
MODE
km/h ↔ m/h
MODE
MENU
When the operation is unstable
When the computer displays incorrectly, perform the restarting operation to stabilize the
operation.
* Performing the restarting operation deletes any records under measurement.
* We recommend that you perform the resetting operation to generate the trip data, before
performing the restarting operation.
Restarting operation
Press the AC button on the back of the computer. All screen items
will light up for 2 seconds, and the unit will change to the GPS
search screen.
AC AC
Data to be stored / data to be deleted
Data to be stored / deleted upon the restarting operation are as follows.
Data to be stored Data to be deleted
Speed unit
Data under measurement
(elapsed time, trip distance, trip distance-2,
average speed, maximum speed, and GPS
route information)
Clock setting
(time zone, previous time zone, daylight sav-
ing time, and display format)
Night-time setting
(start time and end time)
Record interval
Total distance (*1)
Trip data generated upon the resetting opera-
tion
*1 Once you perform the restarting operation before the resetting operation after measure-
ment, the distance is not added to the total distance.
GPS search screen
(press & hold)
Changing
the settings
MODE
From “Entering the total distance” (page 34)
To “Clock setting” (page 29)
Register
the setting