Vaddio GroupSTATION User Manual
Page 10
GroupSTATION
Vaddio GroupSTATION - Document Number 342-0671 Rev B
Page 10 of 40
Anatomy of the GroupSTATION Camera/Sound Bar
Image: GroupSTATION Camera/Sound Bar
1) Camera:
High Definition camera with 19X automatic zoom and manual pan/tilt positioning.
2) Left
Loudspeaker: 2-Way loudspeaker with snap-off speaker grill.
3) Right
Loudspeaker:
2-Way loudspeaker with snap-off speaker grill.
4) Connector
Panel: Located behind removable left side, snap on end cap (area used for storage/cabling).
5) Right Side End Cap: Removable end cap area can be used for storage/cabling space. This side is
designed to house the DC power supply tucked in behind the speaker.
6) Acrylic Facing: Provides attractive frame for the camera. Peel the protective plastic film off when installed.
Image: End View of GroupSTATION Camera/Sound Bar with Left End-cap Removed
1) Power Jack:
5.5mm x 2.5mm coaxial
power jack: Use only the provided 24
VDC, 3.0 Amp switching power supply.
Provides power to the Dock and the
Camera/Sound Bar.
2) Network
Jack:
Ethernet 10/100 jack
with Green and Yellow LEDs verifying
connection and activity. The
GroupSTATION has two IP addresses;
one address is dedicated to the VoIP
User Agent and the second IP address
is for the embedded web server. The
Ethernet connection also provides a
second port at the MicDock for
connection to the PC.
3) LINK Connector:
Proprietary high
speed digital link between MicDock
and the Camera/Sound Bar. 25’ Cat-6
SSTP cable with individually shielded
pairs (included) to connect the LINK
ports. The LINK port is marked in red
on both sides
.
4) HDMI
Connector:
HDMI output for
connection to the room’s display
extending the connected PC’s display.
The HDMI digital video output is routed
to the main monitor or display device
for the GroupSTATION system.
5) Ball and Socket Snap on
Connectors x 4:
Attach the snap on
end caps, as well as, the speaker grills
to the GroupSTATION frame.
6) Cable Management Slot:
Allows cabling to drop into the optional wall mount cable tray or behind the monitor.
7) 2-Way Speaker Enclosure:
End view of the left side hi fidelity speaker. Speakers are attached to the
GroupSTATION frame with T-bolts from the bottom.
8) Speaker
Grill:
Attached to the frame with ball and socket snap on connectors.
➊
➋
➌
➍
➊
➋
➌
➍
➎
➏
➐
➑
➎
➏