Vaddio GroupSTATION - Manual (Page 12)

GroupSTATION
Vaddio GroupSTATION - Document Number 342-0671 Rev B Page 12 of 40
Installation Instructions:
To install the GroupSTATION, follow the Step-by-Step Installation instructions.
Step 1: Position the GroupSTATION Camera/Sound Bar
Position the Camera/Sound Bar at the front of the room over,
or under, the main monitor located in the room. If the
system is to be wall mounted, please see the note below.
The Premium Wall Mount Bracket for the Camera/Sound Bar is available as an
Accessory Option and is also packaged with the GroupSTATION Deluxe and
GroupSTATION Premier Systems. It is highly recommended to purchase the Wall Mount
or buy a package that includes the mount if the intent is to mount the Camera/Sound Bar
to the wall above the monitor.
If the system is to be shelf mounted, cabinet mounted or mounted to a portable stand with wheels, detailed
drawings of the GroupSTATION elements are available at Vaddio.com. General dimensions will also be available
in the specification section of this here manual.
Image: Mounting the Camera/Sound Bar using the Vaddio Premium Wall Mount
Step 1: (continued)
a) Determine optimum location of the GroupSTATION in respect to the room’s large LCD display.
b) Location of the GroupSTATION Camera/Sound Bar should be based upon a position that yields the best eye
contact for the participants in the meeting.
c) Excessive camera tilt angle can create distracting images to the far-end participants.
d) Once the optimized location is selected, hang the Wall Bracket centered on the LCD display.
e) Attach the Wall Bracket with hardware provided in the kit.
Z-Clip Top Channel
1.125” cable cutouts
for in-wall cabling X 3
Cable
Tray
2” x .75” Cutout - Bottom of Tray
Cables can run straight down
behind monitor
Room Monitor
 PC’s display is extended to the front monitor
 Camera/Sound Bar will cover the cable tray and
in this illustration the monitor will slide back to
cover the bottom of the cable tray and hide all
the cables
Premium Wall Mount