Vaddio GroupSTATION - Manual (Page 9)

GroupSTATION
Vaddio GroupSTATION - Document Number 342-0671 Rev B Page 9 of 40
Image: MicDock Side View
(Flying Saucer View)
Image: MicDock Connector Panel Bottom View with Call-outs
(Dock turned over to read connector labels)
1) Network
Connector: Courtesy 10/100 Ethernet port for connection to the PC. Incorporates an embedded
Ethernet switch. Must have LAN connection on the Camera/Sound Bar (primary network connection) for this
network port to function at the MicPOD Dock.
2) LINK Connector: Proprietary high speed digital link between MicDock and the Camera/Sound Bar.
Proprietary link carries bidirectional audio, video, and control. It also supplies power from Camera/Sound Bar
to the MicPOD Dock. Uses 25’ Cat-6 SSTP cable with individually shielded pairs (included) to connect Link
ports. The LINK port is marked in red on both sides. Connect the LINK cable from the Camera/Sound Bar to
the MicDock prior to connecting the system power supply.
3) PC Input (RGBHV/VGA): DE-15 female for connection of PC’s analog output to the GroupSTATION.
4) PC HDMI Input: HDMI connector for PC’s HDMI output to the GroupSTATION.
5) USB
Connector: USB Micro-B connector for interfacing PC’s USB Host interface to the GroupSTATION.
Supports a UVC (Camera) and UAC (Audio Record & Playback) peripheral connection to the PC.
6) Condenser Microphone x 4: Four (4) high quality condenser mics located on the lower shell of the Dock
provide a 360° pick-up audio pattern for meeting participants
➊
➋ ➌
➍
➊
➎
➍
➎
➋
➌
➏