Vaddio TrackVIEW - Manual (Page 25)

TrackVIEW Install Guide 341-337 Rev. G Page 25 of 30
TrackVIEW and Peripherals Install Guide
GENERAL SPECIFICATIONS
TrackVIEW General System Specifications
Cameras Compatible (reference camera):
Vaddio & Sony

Sony EVI-D70 with the Vaddio EZCamera Cabling Shoe
Cameras Compatible (tracking camera):
Vaddio & Sony

Sony EVI-D100 with the Vaddio EZCamera Cabling Shoe

Sony EVI-D70 with the Vaddio EZCamera Cabling Shoe

Sony EVI-HD1 with Quick-Connect PRO and EZIM
Camera Control Ports:
Two (2)

Reference Camera on RJ-45

Tracking Camera on RJ-45
Video Formats Supported: NTSC and PAL
Video Inputs
Two (2)
 Reference Camera - Video Input on RJ-45 (EZCamera Cabling
system with Video/Power on single Cat. 5)
 Tracking Camera - Video Input on RJ-45 (EZCamera Cabling
system with Video/Power on single Cat. 5) and S-Video (for use
with EVI-HD1 Quick-Connect PRO)
Video Outputs:
Four (4) - Total

Reference Camera: Two (2) - Composite on BNC & S-Video on
4-pin mini din– S-Video and composite are concurrently active
 Tracking Camera: Two (2) - Composite on BNC & S-Video on
4-pin mini din – S-Video and composite are concurrently active
Control Interfaces:
Three (3) Total

One (1) RS-232 on DB-9 for control systems

USB for software set-up

One (1) RS-232 Aux. control out
Cat. 5 Cabling Standard 568B
PowerRite Power Supply 5.5A, 18VDC
Camera Presets (discrete):
Five (5) Total – any combination of up to 5 AutoVIEW IR Sensors or
StepVIEW Mats – Auto-Sensing
Combination Presets (multi-step mode)
Additional ten (10) combination presets can be set-up when two
triggers are activated in Multi-Step mode
Weight: 3 lbs. (1.36kg) (controller only est.)
Dimensions (H x W x D): 3.5” (8.89cm) x 19-1/8” (48.58cm) (with rack ears) x 6” (15.24cm)