Vaddio TrackVIEW - Manual (Page 17)

TrackVIEW Install Guide 341-337 Rev. G Page 17 of 30
TrackVIEW and Peripherals Install Guide
Room Set-up Controls
Click on the Room Set-up tab to reveal the interdependent controls of Camera Tracking Speed, Learn Rate and
Contrast (see Figure 25). The Room Set-up tab is named for the video performance within the room such as
presenter movement, background complexity and contrast between the presenter and background and video
performance and noise issues.
 Camera Tracking Speed adjusts how quickly the Tracking camera responds to the presenter’s movement.
The trade off is while lower values promote smoother camera movement; the Tracking camera may lag
behind the presenter. Higher values have a tendency to produce choppier, quicker movements while
keeping the presenter in view more readily. Set this parameter to best optimize the tracking speed and
movement characteristics of the presenters and the camera used. A camera that can pan faster should use
lower values than cameras that move slower. The highest value which provides the smoothest movement is
suggested. The Tracking speed range is from 1 to 60. The suggested starting value is 12.
 Learn Rate adjusts the time taken by the system to distinguish the background from the presenter’s
movement. Lower values detect movement well but can lag behind faster presenter movement. Higher
values follow the movement closely, but the slower movements may be ignored.
 Contrast adjusts the ability to differentiate the background movement from noise. Lower values increase
the detection of movement but can detect noise as movement. Higher values reduce the sensitivity to
movement as well as noise detected as movement.
Note: Yellow Highlighted Parameters - See Note on Page 21 about highlighted parameters
Figure 25: Room Set-up Controls