Beijer Electronics NA-9379 - Manual (Page 27)

27
MODBUS Programmable I/O NA-9379 FnIO S-Series
Copyright(C) CREVIS Co.,Ltd Support +82-31-899-4599 URL : www.crevis.co.kr
5.3. BootP/DHCP Setting
You can selected to ‘IP Setting method’.
* BOOTP: short for Bootstrap Protocol, is a UDP network protocol used by a network client to obtain its IP
address automatically. This is usually done in the bootstrap process of computers or operating systems running on
them. The BOOTP servers assign the IP address from a pool of addresses to each client.
* DHCP: set of rules used by communications devices such as a computer, router or network adapter to allow the
device to request and obtain an IP address from a server which has a list of addresses available for assignment.
(1) Run ‘[Crevis] -> [IOGuidePro] -> [Protocol Messenger] -> [Modbus]’