Create a bios policy, 4 create a bios policy – KEMP Cisco B-Series User Manual
Page 12
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 12 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
14. Expand the Operational Parameters section.
15. Select the relevant Adapter Policy.
16. Select the relevant QoS Policy.
17. Click OK.
18. Click OK again.
19. Add the remaining vNICs needed.
2.4
Create a BIOS Policy
To create a BIOS policy:
1. Select the Servers tab at the top.
2. Expand Policies.
3. Expand root.
4. Select BIOS Policies.
Figure 2-11: Create
5. Click the plus button to create a new policy.
Figure 2-12: Main BIOS Properties
6. Enter a Name.
7. Set the options as follows:
a) Reboot on BIOS Settings Change: Disabled
b) Quiet Boot: enabled
c) Post Error Pause: disabled
d) Resume Ac On Power Loss: last-state
e) Front Panel Lockout: disabled