Boot the server, 3 boot the server – KEMP Cisco B-Series User Manual
Page 17
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 17 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
3.3
Boot the Server
The server is now ready to be booted to complete the installation procedure.
If the local disk is empty, that is contains no valid boot partition, simply click the Boot Server option
on the KVM console. The server is booted from the previously mapped virtual CD.
If the local disk does contain a valid bootable partition you can explicitly select the virtual CD from
the servers boot menu by completing the following steps:
1. Press F6 when the boot process reaches the point illustrated in Figure 3-3.
2. The Boot Menu Screen, as illustrated by Figure 3-4, appears
Figure 3-4 The Boot Menu Screen
6. Select the Cisco Virtual CD/DVD option and press Enter.
The server should boot from the virtual CD
Figure 3-3 Server Boot Menu Selection