KEMP Cisco B-Series - Manual (Page 13)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 13 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
Figure 2-13: Advanced Processor options
8. In the Advanced > Processor tab, set the options as follows:
a) Turbo Boost: enabled
b) Enhanced Intel Speedstep: enabled
c) Hyper Threading: disabled
d) Core Multi Processing: all
e) Execute Disabled Bit: Platform Default
f) Virtualization Technology (VT): Platform Default
g) Direct Cache Access: enabled
h) Processor C State: disabled
i) Processor C1E: disabled
j) Processor C3 Report: disabled
k) Processor C6 Report: disabled
l) Processor C7 Report: disabled
m) CPU Performance: hpc
n) Max Variable MTRR Setting: Platform Default