KEMP Cisco B-Series - Manual (Page 18)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 18 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
3.4 Install the LoadMaster
Once the server boots from the virtual CD, as described in Section 0, the LoadMaster installation
process automatically begins.
The serial number will be automatically populated. Press OK.
The installation then completes as shown in Figure 3-5
Figure 3-5 Installation Complete
3.5 Boot the Installed LoadMaster
The server is now ready to be rebooted with the LoadMaster software installed on the local disk.
Within the KVM console, select the Ctrl-Alt-Del option from the Macros drop-down menu.
The server should now begin to boot from the local disk.