Installing loadmaster on the cisco ucs blade, Open the kvm console for the b-series server, 3 installing loadmaster on the cisco ucs blade – KEMP Cisco B-Series User Manual
Page 15
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 15 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
3 Installing LoadMaster on the Cisco UCS Blade
The following steps must be completed in order to install the LoadMaster software on the Cisco
B-Series Blade Server. These steps must be completed on the jump host, where the LoadMaster
installation ISO image is located.
3.1
Open the KVM console for the B-series server
1. Select the Servers tab in the navigation pane.
2. Within the expandable tree view select the relevant server.
3. Select the General tab in the main pane.
4. Click the KVM console option within the Actions section.
5. This will open a KVM console window from which the installation can be completed.
Figure 3-1 The Cisco UCS Manager