KEMP Cisco B-Series - Manual (Page 24)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 24 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
This interface can be configured at a later date using the LoadMaster WUI if preferred
14. Click OK.
15. Enter the IP address of the default gateway in the input field of the Default Gateway
dialog box.
This value must be configured from within the KVM console
16. Click OK.
Figure 4-2 Default Gateway
17. Click Yes within the Reboot screen when requested.
Figure 4-3 Reboot
18. In your internet browser enter the IP address of the eth0 inter you entered in Step 6.
Ensure you place ’https://’ before the IP address.
19. You may get a warning regarding website security certificates. Please click on the
continue/ignore option.
20. The LoadMaster End User License Agreement screen appears.
Please read the license agreement and, if you are willing to accept the conditions therein,
click on the Agree button to proceed.
21. If your machine has shipped with a temporary license you should get a warning
informing you that a temporary license has been installed on your machine and for how
long the license is valid.
Click OK.
22. You should now connect to the Appliance Vitals screen of the LoadMaster.