Goulds Pumps 3296 EZMAG - IOM User Manual
Page 54
Advertising
Maintenance
3. Remove the screws (370B) holding the bearing frame to the frame adapter.
1. Frame-to-adapter hex screw (370B)
2. Frame assembly
3. Mag drive carrier
4. Frame-to-adapter gasket (360W)
5. Adapter
4. If required, use jackscrews to separate the parts using the two threaded holes in the
bearing frame.
Pump size
Screw type
S-Group
M12
M-Group
M14
5. Lift the bearing frame assembly off the adapter.
Use a crane, if available.
6. Remove the frame-to-adapter gasket (360W).
7. Secure the drive shaft so that it cannot rotate.
52
Model 3296 EZMAG Installation, Operation, and Maintenance Manual
Advertising