Goulds Pumps 3296 EZMAG - IOM User Manual
Page 69
Advertising
Maintenance
The S-group has a drive key, which is automatically placed into position during installation
when installed.
4. Cut out a small notch on the inside diameter of the intermediate ring gasket (351X) in order
to create a recess for the driven carrier pin (445A) or key, depending on size.
1. Driven carrier assembly (740A)
2. Driven carrier pin (445A)
3. Notch
4. Intermediate ring spacer (351X)
5. Apply anti-seizing compound to the shaft and shaft threads.
Model 3296 EZMAG Installation, Operation, and Maintenance Manual
67
Advertising