Goulds Pumps LF 3196 i-FRAME - IOM - Manual (Page 17)

Part description LF 3196
3196
3796
HT 3196
CV 3196
LF 3196
3198
NM 3196
Casing Impeller Cover Power end
Figure 6: LF 3196 part description
This table describes the pump casing parts.
Table 3: Casing
Part Description
Discharge Top-centerline
Casing ventilation Self venting
Gasket Fully confined
Mounting method Integral foot support for maximum resistance to misalignment and distortion due
to piping loads.
Standard flange • ANSI class 150 raised-face serrated flanges are standard on 4 in., 8 in., and 10
in. sizes
• ANSI class 300 raised face serrated flange is standard on the 13 in. size
Optional flanges ANSI class 300 raised-face serrated flange is optional on 4 in., 8 in., and 10 in.
sizes.
Impeller
The impeller is
• fully open with radial vanes and balance holes
• screwed onto the shaft
The threads are sealed from the pumped liquid by a Teflon O-ring.
Product Description
Model LF 3196 i-FRAME Installation, Operation, and Maintenance Manual 15