Rugged Ridge XHD Low-Mount Snorkel, 3.6L, 12-14 Jeep Wrangler (JK) - Manual (Page 2)

Page 2 of 22 REV.2 01/15/2013
4
- Remove both wiper
arms from vehicle.
5
- Using a flat head screw
driver carefully remove
cowl center plastic
retainer clips.
6
- Carefully remove cowl
cover from vehicle.
7
- Removal of front passenger
side door is recommended.
This will allow easy access to
fender bolts. Follow owners
manual for proper door
removal steps. The help of
a second person is
recommended.
8
- Remove top four (10mm)
fender bolts (arrows). Place
bolts to the side noting
location of each bolt. Bolts
will be reused.
9
- Remove 2 inner cowl bolts
located under cowl cover.
note location of each
bolt. Bolts will be reused.
17756.06 - (3.8L) Low Mount XHD Modular Snorkel
17756.08 - (3.6L) Low Mount XHD Modular Snorkel
Snorkel Installation Instructions: 2007-2013 Wrangler 2DR & 4DR Unlimited