Festo Распределители с резьбой G1/8 User Manual
Page 4
Advertising
Modification of switching function
der Schaltfunktion
The switching function can be modified as
Umbau kann die Schaltfunktion
follows:
dert werden:
Variant 1 Variante 1
Variant 2 Variante 2
0
O-l
1
1-2
2 - 3
0 - 4
Idle stroke
Switching point -start of opening
Switching range
idle stroke
Overrun
-The switching range corresponds to the
basic setting in accordance with
DIN 43694.
Procedure:
Unscrew the control actuator.
O-l Leerlauf
1
Schaltpunkt
1-2 Schaltbereich
2 - 3 Leerlauf
0 - 4 Nachlauf
Der Schaltbereich entspricht der Grundein-
stellung
DIN 43694.
Vorgehen:
Schaltkopf abschrauben.
Turn the pin in accordance with the desired
entsprechend der
switching function.
Schaltfunktion drehen.
Variant 2
Variante 2
Advertising