WIKA DI30 - Manual (Page 11)

4 Design and function
WIKA operating instructions digital indicator model DI30 11
Operating elements
1: Program key
2: DOWN key
3: UP key 4: Zero key
5: 7 segment display
6 +7: LEDs for displaying the alarm
contacts
4 Design and function
4.1 Short description
With the digital indicator DI30 standard signals DC 0/4…20 mA or DC
0…5/10 V can be measured. The 4 digit display shows the measurements or
the scaled value of the measurement. During programming the display is
used to indicate the set values and the user prompts.
Two relays (alarm outputs 1 and 2) are available to monitor threshold values,
the status of which is displayed via two separate LED on the front. The
integrated DC 24 V transmitter supply is used to supply connected sensors.