WIKA DI30 - Manual (Page 13)

6 Commissoning, operation
WIKA operating instructions digital indicator model DI30 13
Store the instrument in its original packaging in a location that fulfils the
conditions listed above. If the original packaging is not available, pack and
store the instrument as described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the
packaging.
3. If stored for a prolonged period of time (more than 30 days), place a
bag, containing a desiccant, inside the packaging.
WARNING!
Before storing the instrument (following operation), remove
any residual media. This is of particular importance if the
medium is hazardous to health, e.g. caustic, toxic,
carcinogenic, radioactive, etc.
6 Commissoning, operation
Please read the safety instructions and installation instructions in chapter 2
before installation and keep this user manual for future reference.
6.1 Mounting
Indicator for panel mounting:
Before assembly a cut-out must be made to accommodate the device. The
sizes and tolerances are given in the technical data.
On front of the DI30 are the operating and display elements. On the sides are
the fixing elements to mount the device in the panel. On the back are the
terminals for all the electrical connections. A gasket is inserted between the
contact surface of the front collar and the control panel.