American Aimers VIIPRO Image Processor Headlight Aimer - Manual (Page 13)

Vision II Pro TM Manual
Page 13 of 28
1.9 SET-UP AIMING BAYS
For aiming areas select floor surfaces that are
reasonably level. Avoid extremes and variable slopes
caused by floor drains.
From OPTIONS screen, press BAYS button.
1.10 SET NUMBER OF BAYS
This menu allows the operator to select from one to
fifteen areas to be designated as aiming bays.
Enter the number of separate aiming bays by
pressing the “PLUS” and “MINUS” buttons. When the
number displayed is the number of separate aiming
areas used, press the “NEXT” button to continue with
aimer preparation.