American Aimers VIIPRO Image Processor Headlight Aimer - Manual (Page 2)

Vision II Pro TM Manual
Page 2 of 28
Introduction and Equipment Precautions
Congratulations! You now have the world’s most advanced headlamp aiming
technology available to the U.S. automotive aftermarket. The Vision II Pro™
Image Processing Headlamp Aimer provides factory-precise analysis to the
automotive aftermarket. Precision laser positioning, high technology photometric
analysis and computer quick calculations make the Vision II Pro™ the most
accurate headlight aiming device available.
The versatility of the Vision II Pro™ system enables you to aim nearly any
headlamp on any make of vehicle throughout the world. Standard, auxiliary, fog,
rectangular, round, or aerodynamic VOL, VOR, HIGH, LOW headlamps can be
precisely aimed, regardless of size.
The precision accuracy of laser technology is used to determine the vehicle
centerline and optical center of the headlamps. Computer-image processing
technologies form the basis for the Vision II Pro™ System. It analyzes and
displays the light pattern as it would appear on the roadway at twenty-five feet
(25’) ahead of the vehicle. Upon positioning the headlamp, a digital translation of
the headlight beam is displayed on the screen, graphically illustrating the ideal
alignment position in inches or centimeters. While viewing the screen, you adjust
the headlamp adjustment screws to align the beam pattern cross-hairs with the
visual aim indicators.
The Vision II Pro™ will never become obsolete. It will always be on the leading
edge of technology. The system can be expanded when new aim patterns
develop.
This user manual should be read in its entirety before operating the Vision II
Pro™ System. If you have any questions, please contact an American Aimers
Representative for further information at 1-877-343-7703.
FOR YOUR SAFETY, READ AND FOLLOW ALL CAUTION AND WARNING
LABELS AFFIXED TO YOUR EQUIPMENT.