Sony/philips digital interface (s/pdif), Figure 15. s/pdif output, Exclusive functions – Cirrus Logic CS4202 User Manual

Page 44: Ered down; see section 7, exclusive functions, Cs4202

Advertising
background image

CS4202

44

DS549PP2

6. SONY/PHILIPS DIGITAL

INTERFACE (S/PDIF)

The S/PDIF digital output is used to interface the
CS4202 to consumer audio equipment external to
the PC. This output provides an interface for stor-
ing digital audio data or playing digital audio data
to digital speakers. Figure 15 illustrates the circuits
necessary for implementing the IEC-958 optical or
consumer interface. For further information on
S/PDIF operation see application note AN22: Over-
view of Digital Audio Interface Data Structures
[3].
For further information on S/PDIF recommended
transformers see application note AN134: AES and
S/PDIF Recommended Transformers
[4].

7. EXCLUSIVE FUNCTIONS

Some of the digital pins on the CS4202 have mul-
tiplexed functionality. These functions are mutual-
ly exclusive and cannot be requested at the same
time. The following pairs of functions are mutually
exclusive:

•

GPIO and Serial Data Port (GPIO0 pin is
shared with LRCLK pin, GPIO1 pin is shared

with SDOUT pin, and GPIO4 pin is shared with
SDO2 pin)

•

EAPD and Serial Data Port Serial Clock
(EAPD pin is shared with SCLK pin)

Use of the GPIO0/LRCLK, GPIO1/SDOUT, and
GPIO4/SDO2 pins for serial data port has priority
over their GPIO functionality. There is no priority
assigned to the other exclusive function. A function
currently in use must be disabled or powered down
before the corresponding exclusive function can be
enabled. The following control bits for these func-
tions will behave differently than normal bits: the
EAPD bit in the Powerdown Control/Status Regis-
ter (Index 26h)
, the GC[4,1
:0] bits in the GPIO Pin
Configuration Register (Index 4Ch)
, and the
SDO2, and SDSC bits in the Serial Port Control
Register (Index 6Ah)
. These bits can become
read-only bits if they control a feature that is cur-
rently unavailable because the corresponding ex-
clusive feature is already in use, or the
corresponding master control for this feature is not
set.

1

2

3

4

5

6

0.1

µF

R

2

R

1

J1

DGND

DVdd

R

1

R

2

SPDIF_OUT

TOTX-173

SPDIF_OUT

+5V_PCI

DGND

8.2 k

Ω

DGND

DGND

3.3V

247.5

Ω

107.6

Ω

5V

375

Ω

93.75

Ω

T

1

Figure 15. S/PDIF Output

Advertising