Crd5490-z – Cirrus Logic CRD5490 User Manual

Page 25

Advertising
background image

CRD5490-Z

DS988RD1

25

APPENDIX 1: CRD5490 GUI REMOVAL

Follow the steps below to remove the CS5490 GUI software:

1. From the Start menu, click Control Panel. The Control Panel window is displayed.

2. Click Add or Remove Programs. The Add or Remove Programs window is displayed.

3. Highlight to select the Cirrus Power Monitor (CRD5490) item, as shown in Figure 28.

4. Click the Change/Remove button, and follow the instructions. The CS5490 GUI is removed.

Figure 27. Control Panel Window

Figure 28. Add or Remove Programs with Cirrus Power Monitor (CRD5490) Displayed

Advertising
See also other documents in the category Cirrus Logic Hardware: