Cirrus Logic CRD5490 - Manual (Page 7)

CRD5490-Z
DS988RD1 7
3. SOFTWARE OVERVIEW
The evaluation board comes with software and a USB cable to link the evaluation board to the PC. The evaluation
software was developed with Microsoft
® Visual Studio ® and was designed to run with Windows XP
™
and Windows
7 ™ . The following procedure is based on Windows XP.
3.1 Installation Procedure
Follow the steps below to install the GUI and the CDC driver software:
1. Access the following web site: http://www.cirrus.com/en/support .
2. Click the Energy Measurement link.
3. Click the CRD5490 link. The Software License web page is displayed.
4. To agree with the terms and conditions, click the Agree button. The File Download window is displayed.
5. Click the Save button. The Save As window is displayed.
6. Select a location to store the compressed folder.
7. Click the Save button. The Download complete window is displayed.
8. Click the Open Folder button. The location where the compressed folder is stored is displayed.
9. Right-click on the compressed folder, and click Extract All.
10. Select a location to extract the files.
11. Navigate to the location where the extracted files are stored and double-click on the setup.exe file.
Figure 5. Location of the Unzipped Files