Cirrus Logic CRD5490 - Manual (Page 8)

CRD5490-Z
8 DS988RD1
The application will verify system requirements. The Application Install - Security Warning window is displayed.
12. Click the Install button.
13. Follow the instructions of the Microsoft.Net Framework installation.
The Microsoft.Net Framework may need to be installed on the system. Internet access may be required to install
the Framework or language packs. The download will start automatically. If installation stops after Framework
is installed, select setup.exe from step 11.
The installation program will automatically load the application after installation. If the CDC driver is already in-
stalled and the CRD5490-Z is connected (AC power and USB cable), then the CRD5490-Z will be recognized
and ready.
If the CDC driver is not installed, connect the USB and AC power source, then install the serial CDC Driver when
Windows recognizes the device. Refer to Appendix 2: CDC Driver Installation on page 26 for more details.
14. If necessary, execute the GUI using the next section, 3.1.1 Executing the GUI.
3.1.1 Executing the GUI
1. From the Start menu, click All Programs.
2. Click Cirrus Logic.
3. Click Cirrus Power Monitor (CS5490). The GUI is launched.
Figure 6. Application Install - Security Warning Window