Norgren Filter Contents - Manual (Page 24)

F18 General Purpose Filters
Littleton, CO USA Phone 303-794-2611 www.norgren.com ALE-1-17
Technical Data
Fluid: Compressed air
Maximum pressure: 250 psig (17 bar)
Operating temperature*: -30° to 175°F (-34° to 80°C)
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).
Particle removal: 5 µm, 25 µm, 40 µm or 100 µm filter element
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Typical flow with a 40 µm element at 90 psig (6.3 bar) inlet pressure and 5 psig
(0.35 bar) pressure drop: 1300 scfm (614 dm 3 /s)Nominal bowl size: 7 fluid
ounce (0.2 liter)
Manual drain connection: Will fit 1/8-27 and 1/8-28 pipe thread.
Automatic drain connection: Will fit 1/8-27 and 1/8-28 pipe thread. - Flexible tube
with 3/16" (5mm) minimum I.D. can be connected to the automatic drain. Drain
may fail to operate if the tube I.D. is less than 3/16" (5mm). Avoid restrictions in
the tube.
Automatic drain operating conditions (float operated):
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2 scfm (1 dm
3 /s)
Manual operation: Depress pin inside drain outlet to drain bowl
Materials
Body: Aluminum
Intermediate body: Aluminum
Bowl:
Aluminum
Metal bowl liquid level indicator: Transparent nylon
Filter element: Sintered bronze
Elastomers: Neoprene and nitrile
An automatic drain is a two-way valve, which will close when the system is
pressurized. The drain opens when the float rises due to accumulated liquid
and on depressurization.
Typical Performance Characteristics
PRESSURE DROP
0.6
0.4
0.2
0
bar d
10
8
6
4
2
0
psid
PORT SIZE: 2 "
ELEMENT: 40 µ m
0 200 400 600 800 1000 dm 3 /s
AIR FLOW
0 400 800 1200 1600 2000 scfm
36 (2.5) 58 (4.0) 90 (6.3) INLET PRESSURE: psig (bar g)
150
(10.0)
116
(8.0)
180
(12.5)
8.16 (207)
15.10 (384)
1.86 (47)
8.22 (209)
3.16 (80)
Automatic Drain
15.70 (399)
1/4 Turn Manual Drain
23.58 (599) ** 22.99 (584) **
Optional
Service
Indicator
Intermediate
Body
Bowl
Body
Service kit contains body o-ring, element gasket, automatic drain
gasket, and bowl o-ring.
Service Kits
Item Type Part Number
Service kit Seal & Gasket 5945-50
5 µm 5882-11
Replacement elements
25 µm 5882-12
40 µm 5882-13
100 µm 5882-14
Liquid level lens kit Prismatic 4380-050
Automatic 3000-10
Replacement drains
Manual quarter turn 619-50
** Minimum clearance required to remove intermediate body and bowl.
All Dimensions in Inches (mm)