Norgren Filter Contents - Manual (Page 37)

F68C, F68H Oil Removal (Coalescing) Filters
Littleton, CO USA Phone 303-794-2611 www.norgren.com ALE-2-13
Technical Data
Fluid: Compressed air
Maximum pressure: 250 psig (17 bar)
Operating temperature*: 0° to +150°F (-20° to +65°C)
* Air supply must be dry enough to avoid ice formation at temperatures below +35°F (+2°C).
Particle removal: 0.01 µm
Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content).
Maximum remaining oil content: 0.01 mg/m
3 at +70°F (+20°C) with an inlet
concentration of 17 mg/m3.
Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal
performance:
1/2" ports: 74 scfm (35 dm
3 /s)
3/4" ports: 74 scfm (35 dm 3 /s)
1" ports: 127 scfm (60 dm 3 /s)
1/4 turn manual drain connection: 1/8" pipe thread
Automatic drain connection: 1/8" pipe thread
Automatic drain operating conditions (float operated):
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2 scfm (1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl
Nominal bowl size:
1 pint U.S. (0.5 liter)
1 quart U.S. (1 liter)
Materials:
Body: Aluminum
Yoke: Aluminum
Bowl: Aluminum
Liquid level indicator: Pyrex
Element: Synthetic fibre and polyurethane foam
Elastomers: Synthetic rubber
Service life indicator:
Body: Transparent nylon
Internal parts: Acetal
Spring: Stainless steel
Elastomers Nitrile
An automatic drain is a two-way valve, which will close when the system is
pressurized. The drain opens when the float rises due to accumulated liquid
and on depressurization.
FLOW CHARACTERISTICS
0 20 40 60 80 100 dm 3 /s
AIR FLOW
0 40 80 120 160 200 240 scfm
PRESSURE DROP
0.8
0.6
0.4
0.2
0
bar d
10
8
6
4
2
0
psid PORT SIZE: 1/2"
DRY ELEMENT
INLET PRESSURE - psig (bar)
36
(2.5)
58
(4.0)
91
(6.3)
116
(8.0)
150
(10.0)
FLOW CHARACTERISTICS
0 40 80 120 160 200 dm 3 /s
AIR FLOW
0 80 160 240 320 400 480 scfm
0.8
0.6
0.4
0.2
0
PRESSURE DROP
bar d
10
8
6
4
2
0
psid PORT SIZE: 1"
DRY ELEMENT
INLET PRESSURE - psig (bar)
36
(2.5)
58
(4.0)
91
(6.3)
116
(8.0)
150
(10.0)
Typical Performance Characteristics
Inlet Pressure Maximum Flow*
F68C F68H F68H
1/2" Ports 3/4" Ports 1" Ports
psig (bar) scfm (dm3/s) scfm (dm3/s) scfm(dm3/s)
15 (1) 30 (14) 30 (14) 51 (24)
45 (3) 51 (24) 51 (24) 87 (41)
70 (5) 66 (31) 66 (31) 112 (53)
90 (6.3) 74 (35) 74 (35) 127 (60)
100 (7) 78 (36.7) 78 (36.7) 133 (63)
130 (9) 89 (42) 89 (42) 153 (72)
* Maximum flow to maintain stated oil removal performance.
13.5 (343)
¶
*
7.5 (190)*
3.11 (79)
†
1.73 (44)
Standard Visual
Service Indicator
2.40
(61)
Automatic Drain
14.2 (361)
¶
8.2 (208)
13.8 (350)
¶
7.8 (197)
Manual Drain
1 Pint US
(0.5 Liter) Bowl
† For optional electrical service life indicator, add 0.02" (5 mm). * Dimension also applies to closed bottom bowl.
¶ Minimum clearance required to remove bowl.
18.2 (463)
¶
10.6 (269)
Manual Drain
17.8 (452)
¶
10.2 (258)
1/4 Turn Manual Drain
1 Quart US
(1 Liter) Bowl
17.5 (445)
¶
*
Automatic Drain
.
2.40
(61)
9.9 (251)*
3.11 (79)
†
1.73 (44)
Standard Visual
Service Indicator
.
1/4 Turn Manual Drain
7.48 (190)
2.13 (54)
Service Kits
Service kit Includes element seal, bowl seal, drain seal.
Item Type Part Number
Service Kit Seal and gasket 4380-301
Replacement Standard flow (F68C) 5351-08
Elements High flow (F68H) 5351-03
Replacement 1 pint US (0.5 liter) 4380-060
Sight Glass 1 quart US (1 liter) 4380-061
Replacement Automatic (G 1/8 outlet) 3000-04
Drains Automatic (1/8 NPT outlet) 3000-03
Manual 684-84
Manual, 1/4 turn 619-50