Norgren Filter Contents - Manual (Page 52)

F46 Oil Vapor Removal Filters
Littleton, CO USA Phone 303-794-2611 www.norgren.com ALE-3-11
All Dimensions in Inches (mm)
Technical Data
Fluid: Compressed air
Maximum pressure: 250 psig (17 bar)
Operating temperature: *0° to 150°F (-20° to 65°C)
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C)
Air quality: Within ISO 8573-1, Class 1** (oil content) when air is prefiltered with a
Norgren oil removal filter
** See ALE-1-G for specification details.
Maximum remaining oil content of air leaving the filter: 0.003 ppm at 70°F (20°C)
when air is prefiltered with a Norgren oil removal filter
Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal
performance: 60 scfm (28 dm 3 /s)
Required prefilter: Oil removal filter with equivalent pipe size and flow capacity
equal to or greater than the vapor removal filter.
Materials:
Body: Aluminum
Bowl:
Aluminum
Filter element: Activated carbon, nylon, aluminum
Elastomers: Neoprene and nitrile
Typical Performance Characteristics
PRESSURE DROP
0.3
0.2
0.1
0
bar d
5
4
3
2
1
0
psid
0 10 20 30 40 50 dm 3 /s
AIR FLOW
0 20 40 60 80 100 scfm
PORT SIZE: 3/8", 1/2", 3/4"
ELEMENT: ADSORBING
150
(10.0)
Maximum flow to
maintain stated oil
removal performance
58 (4.0) 36 (2.5) INLET PRESSURE:
psig (bar g) 90 (6.3) 116 (8.0)
4.32 (110)
4.75 (121)
1.25 (32)
10.63 (270)
F46 Standard
13.62 (346)
†
5.31 (135)
1.25 (32)
17.29 (439)
†
F46 Compact
Service Kit
Item Type Part number
3/8", 1/2", 3/4" Service kit Element and element o-ring 665-08
1" Service kit Element and element o-ring 665-70
Replacement drain Manual (1/4 Turn) 619-50
† Minimum clearance required to remove bowl.