Norgren Filter/Regulators - Manual (Page 10)

See Section ALE-24 for Accessories
Littleton, CO USA Phone 303-794-2611 www.norgren.com
B64G
● Olympian Plus plug in design
● High Efficiency water and particle removal
● Quick release bayonet bowl
● High visibility prismatic sight glass
● Push to lock adjusting knob with tamper resistant
option
Olympian Plus Filter/Regulator
1/4", 3/8", 1/2", 3/4" Port Sizes
ALE-12-10
Ordering Information. Models listed include PTF threads, knob adjustment, automatic drain, metal bowl, 40 µm element, relieving diaphragm, 5 to 150
psig (0.3 to 10 bar) outlet pressure adjustment range* with gauge.
† Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set.
Port Size Model Flow † scfm (dm 3 /s) Weight lb (kg)
1/4" B64G-2AK-AD3-RMG 64 (30) 3.80 (1.71)
3/8" B64G-3AK-AD3-RMG 161 (76) 3.76 (1.69)
1/2" B64G-4AK-AD3-RMG 225 (106) 3.69 (1.66)
3/4" B64G-6AK-AD3-RMG 225 (106) 4.49 (2.02)
Alternative Models
B 6 4 - G ★ ★ - ★ ★ ★ ★
Port Size Substitute
1/4" 2
3/8" 3
1/2" 4
3/4" 6
No Yoke N
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Diaphragm Substitute
Relieving R
Non relieving N
Element Substitute
5 µm 1
25 µm 2
40 µm 3
Adjustment Substitute
Knob K
T-bar T
Bowl Substitute
Metal with liquid level indicator D
Guarded Transparent P
- ★ ★ ★
Drain Substitute
1/4 turn manual Q
Automatic A
Gauge Substitute
With G
Without N
Outlet Pressure Adjustment Range* Substitute
5 to 60 psig (0.3 to 4 bar) F
5 to 150 psig (0.3 to 10 bar) M
10 to 250 psig (0.7 to 17 bar) S**
* Outlet pressure can be adjusted to pressures in excess of, and less than, those
specified. Do not use these units to control pressures outside of the specified ranges.
** Units with 250 psig (17 bar) adjustment range are available only with the T-bar
adjustment; therefore substitute T at the 7th digit and S at the 12th position.