Norgren Filter/Regulators - Manual (Page 15)

ALE-12-15
All Dimensions in Inches (mm)
B39 Oil Removal Filter/Regulator
Littleton, CO USA Phone 303-794-2611 www.norgren.com
Technical Data
Fluid: Compressed air
Maximum pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl: -30° to 125°F (-34° to 50°C)
Metal bowl: -30° to 150°F (-34° to 65°C)
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C)
Particle removal: Down to 0.01 µm
Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content)
Maximum remaining oil content in outlet air: 0.01 ppm at 70°F (21°C) with an inlet
concentration of 17 ppm.
Maximum flow with 90 psig (6.3 bar) inlet pressure † :
4.0 scfm (1.9 dm 3 /s)
† Maximum flow to maintain stated oil removal performance.
Nominal bowl size: 1 fluid ounce (31 ml)
Gauge ports:
1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with ISO G main ports
Drain connection: Will fit 1/8-27 and 1/8-28 pipe thread
Automatic drain operation: Spitter type drain operates momentarily when a rapid
change in air flow occurs or when the supply pressure is reduced.
Materials
Body: Zinc
Bonnet: Acetal
Valve: Brass/nitrile
Valve seat: Acetal
Bowl
Transparent: Polycarbonate
Metal: Zinc
Element: Synthetic fiber and polyurethane foam
Elastomers: Nitrile
PORT SIZE: 1/8 "
INLET PRESSURE: 150 psig (10 bar g)
RANGE: 5 to 100 psig (0.3 to 7 bar)
FLOW CHARACTERISTICS
0 0.5 1 1.5 2 2.5 dm 3 /s
AIR FLOW
0 1 2 3 4 5 6 scfm
OUTLET PRESSURE
8
6
4
2
0
bar g
100
80
60
40
20
0
psig
Typical Performance Characteristics
Automatic Drain
Manual Drain
2.13 (54)
1.63 (41)
1.50 (38)
1.50 (38)
8.41 (214)**
1.12 (28)
2.67 (68)
6.44 (164)
1.1 (28)
8.26 (210)**
1.12 (28)
2.67 (68)
6.29 (160)
1.1 (28)
Panel mounting hole diameter: 1.19" (30 mm)
Maximum panel thickness: 0.25" (6 mm)
** Minimum clearance to remove bowl
Service Kits
Item Type Part number
Service kit
Relieving models 3407-66
Non relieving models 3407-65
Element 4141-10
Replacement drains
Manual 773-03
Automatic 3654-02
Relieving and non-relieving service kits include slip ring,
diaphragm, valve seat with o-ring, valve, and valve spring. Element
kit contains element, element gasket, and bowl o-ring.