B07 miniature general purpose filter/regulator – Norgren Filter/Regulators User Manual
Page 2
See Section ALE-24 for Accessories
Littleton, CO USA
Phone 303-794-2611
www.norgren.com
B07
●
Compact design
●
Full flow gauge ports
●
Low torque, non-rising adjusting knob
●
Snap action knob locks pressure setting when
pushed in
●
Standard relieving models allow reduction of outlet
pressure even when the system is dead-ended
●
Protects air operated devices by removing liquid and
solids contaminants
●
Screw-on bowl reduces maintenance time
●
Can be disassembled without the use of tools or
removal from the air line
Series 07 General Purpose Filter/Regulator
1/8" and 1/4" Port Sizes
ALE-12-2
ISO Symbols
Automatic Drain
Relieving
Manual Drain
Relieving
Automatic Drain
Non Relieving
Manual Drain
Non Relieving
Alternative Models
-
★
★
★
★
★ ★
-
0
★
B
7
Threads
Substitute
PTF
A
ISO Rc taper
B
ISO G parallel
G
Drain
Substitute
Automatic
A
Manual
M
Port Size
Substitute
1/8"
1
1/4"
2
Element
Substitute
5 µm
1
Bowl
Relief Type
Gauge
Substitute
Transparent
Relieving
Without
01
Transparent
Relieving
With
02
Transparent
Non-relieving
Without
03
Transparent
Non-relieving
With
23
Metal
Relieving
Without
33
Metal
Relieving
With
34
Metal
Non-relieving
Without
35
Metal
Non-relieving
With
36
Outlet Pressure Adjustment Ranges*
Substitute
1 to 10 psig (0.1 to 0.7 bar)
A
5 to 50 psig (0.3 to 3.5 bar)
E
5 to 100 psig (0.3 to 7 bar)
K
5 to 125 psig (0.3 to 8.6 bar)
L
Ordering Information.
Models listed include PTF threads, transparent bowl, relieving diaphragm, gauge, automatic drain, 5 µm element, 5 to
100 psig (0.3 to 7 bar) outlet pressure adjustment range* .
Port Size
Model Number
Flow† scfm (dm
3
/s)
Weight lbs (kg)
1/8"
B07-102-A1KA
13 (6.2 dm
3
/s)
0.57 (0.26)
1/4"
B07-202-A1KA
14 (6.5 dm
3
/s)
0.57 (0.26)
* Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified
ranges.
† Typical flow with 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set.