Vollrath CC404A-Water Cooled - Manual (Page 11)

Owner’s Manual #513642 5 CC Model Machines
1.3 INTERNATIONAL ELECTRICAL SPECIFICATIONS
The table below shows the electrical requirements per barrel. Refer to the tables in Section 1.2 for the remainder of
the specifi cations. There is a separate electrical circuit for each barrel.
Air Cooled Remote Water Cooled
Electrical
1 Phase, 200-220
VAC, 50Hz
3 Phase, 380-415*
VAC, 50Hz
1 Phase, 200-220
VAC, 50Hz
3 Phase, 380-415*
VAC, 50Hz
circuit ampacity
(per barrel)
12A minimum 6A minimum 32A minimum 12A minimum
overcurrent protection
device (per barrel)
25A maximum 10A maximum 50A maximum 20A maximum
Hopper Condensing
Unit
1 Phase, 200-240 VAC, 50Hz
Requires a 15amp power cord
Drive Motor Three - 2 hp
* The 380-415 VAC supply requires a neutral. The power supply must be 5 wire for proper operation.
Remote Condensing Unit (1 per barrel)
Electrical 1 Phase, 200-220 VAC, 50Hz 3 Phase, 380-415 VAC, 50Hz
circuit ampacity 20A minimum 15A minimum
overcurrent protection
device
25A maximum 20A maximum
Refrigerant R-404A
Charge 20 lbs. (Charged at Factory)