A few words about safety, Safety information – Vollrath CC404A-Water Cooled User Manual

Page 4

Advertising
background image

Safety Alert Symbol:

This symbol Indicates danger, warning or caution.
Attention is required in order to avoid serious per-
sonal injury. The message that follows the symbol
contains important information about safety.

Signal Word:

Signal words are

distinctive words used throughout

this manual that alert the reader to the existence and
relative degree of a hazard.

CAUTION

The signal word “CAUTION”

indicates a potentially

hazardous situation, which, if not avoided, may result
in minor or moderate injury and equipment/property
damage.

A Few Words About Safety

Safety Information

Read and understand the entire manual before
operating or maintaining Stoelting equipment.

This manual provides the operator with information
for the safe operation and maintenance of Stoelting
equipment. As with any machine, there are hazards
associated with their operation. For this reason safety
is emphasized throughout the manual. To highlight
specifi c safety information, the following safety defi ni-
tions are provided to assist the reader.

The purpose of safety symbols is to attract your at-
tention to possible dangers. The safety symbols, and
their explanations, deserve your careful attention
and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions
or warnings they give are not substitutes for proper
accident prevention measures.

If you need to replace a part, use genuine Stoelting
parts with the correct part number or an equivalent
part. We strongly recommend that you do not use
replacement parts of inferior quality.

WARNING

The signal word “WARNING” indicates a potentially
hazardous situation, which, if not avoided, may result
in death or serious injury and equipment/property
damage.

CAUTION

The signal word “CAUTION” not preceded by the
safety alert symbol indicates a potentially hazardous
situation, which, if not avoided, may result in equip-
ment/property damage.

NOTICE

The signal word “NOTICE” indicates information or
procedures that relate directly or indirectly to the
safety or personnel or equipment/property.

Advertising