Konica Minolta magicolor 7450 grafx - Manual (Page 111)

Media Types 97
"
If you have problems feeding 20 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, thus causing feeding problems.
"
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
„ Approved for laser printing
DO NOT use transparencies that
„ Have static electricity that will cause them to stick together
„ Are specified for inkjet printers only
Glossy Stock
Test all glossy stock to ensure acceptable performance and to ensure that the
image does not shift.
Capacity Tray 1
(Manual Feed
Tray) Up to 10 transparencies, depending on their
thickness
Tray 2 Up to 50 transparencies, depending on their
thickness
Tray 3/4/5 Not supported
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media Type Transparency, Transparency2
"
Transparency2 is a suitable setting for CG3700 of 3M.
Duplexing Not supported
Capacity Tray 1
(Manual Feed
Tray) Up to 10 glossy stock sheets, depending on
their thickness.
Tray 2 Up to 10 glossy stock sheets, depending on
their thickness.
Tray 3/4/5 Not supported