Konica Minolta magicolor 7450 grafx - Manual (Page 87)

Configuration Menu Overview 73
AUTO
CON-
TINUE
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If
AUTO CONTINUE
is set to
ON
, printing automatically con-
tinues after about 10 seconds under the following conditions.
At this time, printing will be performed even if the media size is
different.
No media: PAPER EMPTY (Page 196)/TRAY EMPTY (Page
198)
Different media size/type: PAPER ERROR (Page 196)/TRAY x
PAPER ERR (Page 198)
HOLD
JOB
TIME
OUT
Settings
DISABLE /1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If
DISABLE is selected, print jobs are not deleted
at a specific time.
ENERGY
SAVER
Settings
DEEP SLEEP /LIGHT SLEEP/OFF
If DEEP SLEEP was selected and the printer entered Energy
Saver mode, no operation is available other than that to exit
Energy Saver mode. However, if the printer receives print data
or a control panel key is pressed, the printer will automatically
exit Energy Saver mode and begin operating.
If LIGHT SLEEP was selected, the configuration menu can
be used even if the printer has entered Energy Saver mode. In
addition, if the printer receives print data, the printer begins
operating immediately.
If OFF is selected, the machine will not enter Energy Saver
mode.
ENERGY
SAVER
TIME
Settings
15 minutes/30 minutes/1 hour/
3 hours
Specify the length of time until the machine enters Energy
Saver mode.
This menu item appears only when ENERGY SAVER is set to
ON .