Konica Minolta magicolor 7450 grafx User Manual
Page 236
Advertising
Lower Feeder Unit
222
13
Remove the mounting tape on
the relay harness of the lower
feeder unit, and then remove the
cover over the relay harness
connection slot on the printer.
If multiple lower feeder units
have been installed, remove the
cover over the relay harness
connection slot for any lower
feeder unit other than that on the
bottom, and remove the mount-
ing tape on the relay harness.
"
Use a coin to remove the
screws of the cover.
Advertising
This manual is related to the following products: