Konica Minolta magicolor 7450 grafx - Manual (Page 48)

Configuration Menu Overview 34
2
Select PRINT or DELETE , and then press the Menu/Select key.
"
If PRINT was selected, continue with step 3.
If DELETE was selected, continue with step 5.
3
Press the Up and Down keys to specify the number of copies to be
printed. (Settings:
1 to 999 ; Default: 1 )
4
Press the Menu/Select key.
Printing begins.
5
Select YES or NO .
6
Press the Menu/Select key.
If
YES was selected, the print job is deleted.
If NO was selected, the PRINT/DELETE selection screen appears
again.
Entering a Password
If the print job selected in the PROOF/PRINT MENU is a secured job, a
screen for entering the password appears. Follow the procedure described
below to type in the four-digit password specified from the printer driver.
1
Press the Up and Down keys to increase or decrease the first digit of the
password.
2
Press the Right key to move the cursor to the next digit.
“ Job name ”
,
Desired job name
PRINT
DELETE
If the selected print job was set as a secured job
from the printer driver, a screen for entering the
password appears. For details on typing the
password, refer to “Entering a Password” on page
34.
Press Key Until Display Reads