Konica Minolta magicolor 7450 grafx - Manual (Page 204)

Status, Error, and Service Messages 190
Error Messages (Warning: )
"
“I-UNIT” in a message refers to the imaging unit.
REBOOTING
The printer is being
restarted. No action needed.
WARMING UP
The printer is warming up.
This message... means... do this...
FUSER UNIT
END OF LIFE
The fuser unit has
reached the end of its
life. Contact Technical Sup-
port with the error infor-
mation.
Printing does not stop
immediately when this
message appears.
Therefore, if printing is
continued, an error
appears, and then print-
ing stops.
HDD
NEAR FULL
The hard disk is full. Delete print jobs saved
on the hard disk.
ILLEGAL
INSTALLATION
Since the
CompactFlash was
inserted into the
memory slot after the
printer was turned on,
the CompactFlash
could not be used. Turn off the printer,
insert the CompactFlash
into the memory slot,
and then turn the printer
off, then on again.
INCORRECT
HDD
Since the hard disk
drive was formatted
with a different
machine, the hard
disk drive could not
be used. Replace the hard disk
drive with one
compatible with this
machine, or select
HDD
FORMAT from SYS
DEFAULT MENU and
format the hard disk.
This message... means... do this...