Configuration menu overview 43 – Konica Minolta magicolor 7450 grafx User Manual
Page 57
Configuration Menu Overview
43
TRAY 3
TRAY 4
TRAY 5
PAPER
SIZE
The size of media loaded in Tray 3/4/5 is
indicated. For media sizes that can be
automatically detected, refer to “DETECT
PAPER SIZE
This menu item only shows the current
setting. This setting cannot be changed.
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of media
loaded into Tray 3/4/5.
TRAY
CHAINING
Settings
ON
/OFF
If
ON
is selected and the specified tray runs out of
media during printing, a tray loaded with media of the
same size is automatically selected so printing can
continue.
If
OFF
is selected and the specified tray runs out of
media, printing stops.
TRAY
MAPPING
TRAY
MAPPING
MODE
Settings
ON/OFF
If
ON
is selected, logical tray 0 through 9
can be selected and the assigned tray of
this printer can be used.
If
OFF
is selected, a logical tray cannot
be used.
This setting is used to link a tray setting
specified from a third-party printer driver
with trays on this printer.
LOGICAL
TRAY 0-9
Settings
PHYSICAL TRAY1-5
The physical tray assigned to each
logical tray can be specified.
"
The default setting for
LOGICAL
TRAY 0
is
PHYSICAL TRAY2
.
The default setting for all other
trays is
PHYSICAL TRAY1
.
"
PHYSICAL TRAY 3/4/5 appear
only if an optional lower feeder unit
is installed.