Konica Minolta magicolor 7450 grafx - Manual (Page 212)

Status, Error, and Service Messages 198
I-UNIT MISSING
CHECK X
The X imaging unit is
not installed, or an
unapproved imaging
unit is installed. Install a correct KONICA
MINOLTA imaging unit.
TONER EMPTY
REPLACE
X
The X toner cartridge
is completely empty. Replace the toner car-
tridge.
TONER MISSING
CHECK X
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed. Install a correct KONICA
MINOLTA toner car-
tridge.
TRANS.BELT LIFE
REPLACE
TRANS.BELT
The transfer belt unit
has reached the end
of its life. Contact Technical Sup-
port with the error infor-
mation.
TRAY X EMPTY
“SIZE”
“MEDIA”
The X (Tray 1, 2, 3, 4
or 5) was specified
with the printer driver
for printing, but Tray X
is empty. This mes-
sage appears when
the
PAPER/PAPER
SOURCE/TRAY
CHAINING menu is
set to OFF .
Load the correct media
into the specified tray.
TRAY X PAPER ERR
“SIZE”
“MEDIA”
The media size/type
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER/PAPER
SOURCE/TRAY
CHAINING menu is
set to OFF .
Load the correct media
size and type.
TRAY X SIZE ERR
ADD
“SIZE”
The media size set in
the printer driver is
different from the size
of media loaded. Load the correct media
size into the specified
tray.
This message... means... do this...