Konica Minolta magicolor 7450 grafx - Manual (Page 241)

Caster Base 227
4
Place the bottom optional lower
feeder unit that is to be installed
on the caster base.
"
For correct positioning,
align the two
M marks,
which can be seen inside
the hole in the lower
feeder unit.
5
Use the screws and linking
plates to secure the lower feeder
unit to the caster base.
The linking plates can be
installed at either the two loca-
tions at the front or the two loca-
tions at the back of the caster
base.