Dual in-line memory module (dimm), Installing a dimm, Dual in-line memory module (dimm) 204 – Konica Minolta magicolor 7450 grafx User Manual
Page 218: Installing a dimm 204
Dual In-Line Memory Module (DIMM)
204
Dual In-Line Memory Module (DIMM)
"
You may need additional memory (DIMM) for complex graphics and
for duplex printing.
Dual in-line memory module (or DIMM) is compact circuit board with sur-
face-mount memory chips.
The printer, which has two memory slots, has a 256 MB memory module
already installed in one of the slots. By using both slots, the memory can be
expanded to a maximum of 1024 MB (512 MB + 512 MB).
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 203. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a coin, remove the screw,
and then lift up the left-side
cover to remove it.