Konica Minolta magicolor 7450 grafx - Manual (Page 31)

Using the Postscript and PCL Printer Drivers 17
Basic Tab
The Basic Tab allows you to
„ Specify the orientation of the media
„ Specify the size of the original document
„ Select the output media size
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Specify the number of copies
„ Turn on/off job collation
„ Save a print job on the printer and print it later (Job Retention)
„ Save a confidential job on the printer and protect it with a password
„ Print a single copy for proofing
„ Send a notification by e-mail when printing is finished
„ Specify user information such as e-mail addresses and passwords
„ Print on the back side of media that has already been printed on
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Specify booklet printing
„ Rotate the print image 180 degrees
„ Specify duplex printing
„ Specify whether or not blank pages are printed (PCL printer driver only)
„ Adjust the binding margin (PCL printer driver only)
„ Adjust the printing position (PCL printer driver only)
Cover Page Tab
The Cover Page Tab allows you to
„ Print front and back cover pages and separator pages
„ Specify the tray that contains the media for the front and back cover
pages and separator pages