3 logging on to a multifunctional product, To “logging on to a multifunctional – Konica Minolta bizhub 652 User Manual
Page 23
Advertising
Using AU-201H Authentication Unit
3
AU-201H
23
Reminder:
•
When the multifunctional product is turned off, then on again with the main
power switch, wait at least 10 seconds to turn the machine on after turning it off.
The machine may not operate correctly if it is turned on immediately after being
turned off.
•
Hold the plug when plugging and unplugging the USB cable, otherwise the cable
may be damaged.
3.3
Logging on to a multifunctional product
Follow the procedures described below to log on to multifunctional products by
completing authentication with IC card IDs.
When “Card Authentication” has been specified
%
Position the registered IC card on this device.
The user is authenticated, and the Basic screen appears.
Advertising
This manual is related to the following products: