Konica Minolta bizhub 652 - Manual (Page 5)

Using AU-201H Authentication Unit 3
AU-201H 5
3 Using AU-201H Authentication Unit
In order to use this device, user IC card IDs must first be registered with the machine.
A registered user can log on to a multifunctional product or print a print job after
completing authentication with their IC card IDs. The following procedures describe
how to specify the necessary settings on the multifunctional product, register users,
and perform the logon and print job operations after completing authentication.
Important
Do not disconnect the USB cable while this device is being used, otherwise the
system may become unstable.
Caution
Do not store the IC card within 1.5 inches (approx.) of the card scanning area.
3.1 Multifunctional product settings
Detail:
User authentication on the multifunctional product must be set for machine
authentication.
1
From the control panel of the multifunctional product, press the [Utility/
Counter] button, press [Administrator Settings] and enter the administrator
password, touch [User Authentication/Account Track] on the Administrator
Settings screen, and then touch [General Settings].