Konica Minolta bizhub 652 - Manual (Page 8)

3 Using AU-201H Authentication Unit
8 AU-201H
8
Touch [OK].
9
Touch [Logoff Settings].
10
Select whether or not the user is logged off when scanning of the document is
finished after the user has logged on to this machine.
11
Touch [OK].
12
Touch [Close], and then touch [Close] in the next screen that appears.
3.2 Registering users
There are two methods for registering users.
- Connecting this device to the multifunctional product and registering directly
from the multifunctional product
- Connecting this device to a computer and registering using Data
Administrator
Detail:
Registered user data is stored on the hard disk of the multifunctional product. If
the user authentication method on the multifunctional product is changed or the
hard disk is reformatted, the registered user data is erased.
3.2.1 Registering from the control panel of the multifunctional product
1
From the control panel of the multifunctional product, touch [User
Authentication/Account Track] on the Administrator Settings screen, and then
touch [Authentication System], then [User Registration].